Vocal Pitch Monitor
Loading tool controls…
Analysis range 50–1,000 Hz; RMS gate 0.008 and clarity threshold 0.90. At least 3 seconds of accepted analysis intervals are required for a summary. These thresholds are signal checks, not an accuracy percentage.
The live graph shows 30 seconds; numeric history retains up to the latest 300 seconds. Pause graph freezes the view while the microphone keeps running. Stop microphone ends capture. Leaving this tab stops capture.
No frame selected.
| Time (s) | Hz | Note | State |
|---|---|---|---|
| No frames yet. | |||
Audio is processed in browser memory. This tool sends no audio or results to its server. Numeric takes remain in this page until reset/reload; CSV/JSON downloads contain numbers, not playable audio. Other site services have their own privacy settings.
Related tools
The Vocal Pitch Monitor follows one prominent frequency from your microphone and shows how it changes while you sing. It displays live pitch frames with their time, frequency, nearest note and state. Use it to watch a sustained note, examine an interval or see how much of a phrase the tracker can read. The tool is a live measurement aid. The recording editors accept a saved audio file separately.
Watch one repeatable phrase
- Choose your A4 reference when you need a different tuning standard from 440 Hz.
- Start the microphone and allow access in your browser. Give the meter a quiet moment before making sound.
- Sing a vowel at a comfortable volume. Hold it, then repeat after a brief gap.
- Pause the view to examine the visible trace. Use the numeric frames and time cursor to locate the region you want.
- Stop the microphone when finished. Save the CSV if the numeric trace will help compare another session.
Turn off playback from speakers so the monitor hears your voice as the principal sound. If you want a reference pitch, listen through headphones before the test. Sing a manageable part of your range with a steady level. Holding a vowel gives more useful evidence than a series of whispered syllables.
Read the rolling display and the frame table
The visible graph covers 30 seconds. The tool can retain up to the latest 300 seconds of numeric frames. This makes it possible to finish a line, stop the microphone, and inspect measurements outside the final visible graph window if they are still retained. A longer session continues replacing older frames within the retention limit.
Each accepted frame gives a frequency in Hz and a note under the reference you chose. Read rejected-state entries as gaps in trustworthy pitch evidence. Silence, clipping and unsteady or ambiguous input may not get a valid pitch measurement. The table gives you a text-based way to inspect changes even if tracing the plot is difficult.
Pausing freezes the graph view while the microphone keeps running. Stop microphone ends capture. Leaving the tab stops capture. Save the measurements you need before closing the page; restarting with reset or refreshing can replace or discard the history.
Use the trace to compare two note entrances
Sing the same vowel twice and leave a short pause between takes. Select a stable section after the first attack and check its note and Hz. Do the same for the second. An accepted frame at about 220 Hz maps to A3 at the default reference. Another section settled close to 246.94 Hz maps to B3. If the second sound was intended to repeat A3, hearing it against a keyboard reference can help locate the source of the difference.
For vibrato, check whether several consecutive accepted frames move around the center note. An attack might begin below that area and arrive at it after a moment. For practice, focus on the steady portion of the note before judging the approach. Listen to your voice in a separate recording if you want to hear the phrasing later.
When coaching yourself through a difficult interval, play the two intended notes separately, silence them, then sing them in order. The space between your attempts helps identify which frames belong to each note. Document the reference and microphone position if you plan to compare the series with another day.
Decide what to export
CSV is useful when you want a numeric record of retained frames with time, note, Hz and rejected states. You can open it in a spreadsheet and filter for the held portion of each test phrase. If a point was rejected, preserve that state when comparing sessions. Converting it to zero frequency would change the interpretation of the data.
The microphone data is analyzed locally. The CSV contains measurements and cannot play back the voice. Choose a separate saved recording when you need the sound for editing or controlled comparison. Stop the microphone before switching to another audio task.
Frequently asked questions
Why does the graph drop out between notes?
Pauses, breaths and weak or ambiguous sound can produce rejected frames. A visible gap helps distinguish those intervals from the frequency of a clear sustained note.
Why does changing A4 affect the note name?
Reference tuning changes the frequencies against which the measured value is compared. The reference does not physically change what entered the microphone.
Can the CSV be opened as an audio track?
It provides numeric pitch history. Record an audio file separately when you need to replay or correct the performance.